Soap Mixer Machine

Soap Mixer Machine :

This is a latest and specially designed soap mixer to mix soap noodle or soap chips with other ingredients like color, perfume, preservatives, additives etc. Mixing is done by the specially shaped "Z" blades set on parallel shafts mounted with close clearance in a double 'U' shaped trough. With the help of blades the mass is rolled and folded back and pushed down to join the separate layers. This action is repeated until desired uniformity is obtained. The rotational speed of each blades are different and adjusted according to requirement for better result through heavy-duty reduction gear box system and electric motor. The electric motor can be switched on-off by automatic heavy-duty electric panel board when required. Design of `mixer bucket, design of blades and suitable rotational speed of blades gives extremely well result of mixing. The process of a batch takes normally about few minutes.

Top

Soap Roller Machine

Soap Roller Machine

For the manufacture of high-quality toilet soap a homogeneous soap structure is needed. For homogenization of the soap mixture, roller mills are especially well suited. This is a heavy-duty machine is mainly used for mixing and grinding soap granule with normal temperature and moisture by running special very harden material of three rollers on horizontal to squeeze and grind soap particles. Each soap paste duly mixed with color and perfume requires a close grinding of mixed mass to bring fineness and homogeneity. The action of grinding or calendaring of the mass is done by means of passing through the close gap of rolls to form ribbon (thin layer thickness) like shape. It is done for good texture and odor of toilet soaps. Rolls are kept cool during operation as per cooling arrangement already provided in the machine and water circulates in the rolls accordingly to avoid stickiness of mass with the rolls and to bring a uniformity with a sophisticated fineness in the mass. The rotational speed of each rolls are different and adjusted according to requirement for better result through heavy-duty reduction gear box and electric motor. The electric motor can be switched on-off by automatic heavy-duty electric panel board when required. Design of overall machine with super finely grinded rolls and scraping device gives so extremely well result of rolling (homogenizing) of soap.

Top

Soap Duplex Vacuum Plodder Machine

Soap Duplex Plodder Machine :

The modern soap making uses a duplex vacuum plodder for the final refining, compacting & air free extrusion of a continuous bar especially in toilet soap. The plodder (extrusion machine) is a crucial piece of equipment in the entire soap plant. It plays a major role and gives a final shape in bar form to soap mass. In the first stage soap is compressed, refined and supplied to the vacuum chamber in shape of noodles. The soap is refined by means of a refiner worm press. In order to reach the refining effect, a refining sieve (screen) (perforated disc) is fitted at the outlet of machine. A noodle cutter is fitted very near to same disc which is used for cutting of soap noodles. When the soap mass passed through the same perforated disc it is transferred into noodles form. The noodles fall into the vacuum chamber, where they are taken up by the main extrusion worm press, again compressed continuously and then extruded in the form of bar. Distinctive design of die is provided with the mouth piece of extrusion barrel to achieve a particular size of bar and then bar cut into a fixed size of length. The plodder machine is equipped with suitable cooling jackets system. End of the conical compression head is heated by electrically heated oil bath chamber under the control of a temperature controller to get glossy surface on the soap bar. Design of overall machine with super finely grinded barrels and extrusion cone as well as very special design of machine's extrusion screws and cone give so extremely well result of refining, compacting of soap.

Top

Soap Bar Cutting Machine

Soap Circular Bar Cutting Machine :

This Machine is kept immediately after plodder machine and which is used to cut soap in to bar form. The bar coming continuously from the end mouth (mouth die), enter in to this machine and which cut the same bar in to fixed length. The next process of this bar is to cut in to tablet (cake) form.

Top

Soap Cutting Machine

Soap Cutting Machine for Soap Cakes :

The bars cut in to small soap cakes (tables) by using this soap cutting machine. The final size of cake is adjusted here according to the weight of final soap. Distance between thin wires can be set according to final weight need of soap. This is a reciprocating type wire cutting machine which is hand operated as well as motorized. That is as per buyer's choice.

Top

Soap Stamping Machine

Soap Stamping Machine :

This is a ideal foot operated soap stamping machine where soap cakes are stamped. Soap stamping die (mould) (upper part and lower part) is fitted in the soap-stamping machine and both the parts (dies) movement up and down by rams. The cake comes from soap cutting machine is put between two dies and press a stroke of peddle and finally cake will be stamped and make your branded final soap which is now ready for packing. Generally all type of soap shapes are possible to stamp in this machine. We will supply a set of final soap moulds with this machine and that mould will be prepared according to your logo, brand name etc. So that final soap will be as desired by you. This machine is also suitable to stamp hotel soap. Generally this machine is used for smaller capacity of soap plant. Buyer can also increase the number of machines for getting more capacity or in bigger capacity plant.

Automatic Soap Stamping Machine

Automatic Soap Stamping Machine :

Automatic soap stamping machine is required in bigger capacity of soap plant. Generally 500 kg./hour and above capacity of toilet soap plant is advisable with automatic soap stamping machine. Approximate speed of automatic soap stamping machine is 100-350 soap per minute. The same machine also required chilled water circulation inside dies, air with pressure, vacuum etc. Chilled water is received from water super chilling plant. Air is received from air compressor and vacuum is done by vacuum pump.

<<<< Previous

Top